All Motorcycle Half Helmets

Archive for the ‘Motorcycle Half Helmet’ Category

XU214, Motorcycle Half Helmet, Gloss Black, White Flame

OUTLAW GRIM REAPER MOTORCYCLE HALF HELMET

Isara sets out on a 3000 km motorcycle helmet campaign to educate the youth of Thailand. Thanks for everyones help and support with this project. Visit www.isara.org for more information.

www.cruisercustomizing.com features the HJC IS-2 Motorcycle Half Helmet • Advanced polycarbonate composite shell • Superior fit and comfort using advanced CAD technology • Manual integrated retractable sunshield • Simple manual operation with a positive resistance • Easy access to remove sunshield (no tools needed) • Removable and washable SilverCool interior liner • Moisture-wicking and odor-free with anti-bacterial fabric • Double D-ring chin strap retention system • Meets or exceeds DOT standards Steps to Remove and Install Liner: REMOVAL 1. Start by removing the front portion of the liner before working your way towards the back a. There are (3) pressure clips on the along the front portion of the shell b. Pulling straight down on the liner at the point at which the liner enters the space between the EPS and shell will release the (3) clips 2. Move to middle of shell and pull straight down on the liner at the point at which the liner enters the space between the EPS and shell 3. Again at the rear of the shell, pull straight down on the liner at the point at which the liner enters the space between the EPS and shell INSTALLATION 1. Starting at the front, insert the liner until the (3) clips are firmly in place 2. Working towards the rear, insert the two friction clips at the mid-point of the helmet 3. Continue to the rear of the helmet and insert the remaining rear friction clip

OUTLAW CHROME GERMAN MOTORCYCLE HALF HELMET

This airbrush video covers the preparation of a motorcycle half helmet before airbrushing. What I used in this airbrush video: red Scotch brite pad, Comet house hold cleaner, 800 grit wet/dry sand paper, 1/8 th inch fine line tape, 3M masking tape, helmet stand. After following all the steps in this airbrush video please refer to the tech sheet of the paint product you are using as to adding your airbrush art work. For free airbrush lessons,tutorials check out howtoairbrush.com